Mitsubishi EVO Turbo Upgrade Kit

Evo X 525HP Turbo Upgrade from Garrett

April 26, 2009
1995 Views

Garrett is ready to take your Mitsubishi Lancer Evo X to the next level with their new Evo X Turbo Upgrade.

The Garrett Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to an estimated 475 HP with the Garrett GT3071R or a tire smoking estimated 525 HP with the Garrett GT3076R. Each turbo has been meticulously designed to be a bolt-on upgrade with no fabrication, cutting or welding required.

The Garrett Evo X Turbo Upgrade features a specially designed twin-scroll turbine housing that mates up directly to the Evo X’s stock exhaust manifold, as well as the stock exhaust down pipe, to allow for aftermarket exhausts to be used without worrying about fitment.

Mitsubishi EVO X Turbo Upgrade

The turbine housing allows for the retention of the stock exhaust heat shield for better temperature control as well as a stealth look.

The ported shroud compressor housing reduces the occurrence of surge during operation and mates directly to the intake piping as well as the stock outlet position.

The Garrett patented dual ball bearing center housing is standard on both turbocharger options for unmatched power handling and unbeatable response.

Mitsubishi EVO X Garrett Turbo Kit

Make: Mitsubishi
Model: Lancer Evolution X
Applicable Years: 2008+
Engine: 2.0L, Turbocharged Inline 4

Kit Contains:
-Choice of Garrett® GT3071R (PN 788550-1) or Garrett® GT3076R (788550-2) dual ball bearing application specific turbocharger
-Inlet elbow
-Oil drain line
-Water lines
-Gaskets and necessary hardware
-Installation Instructions

The Garrett Evo X Turbo Upgrade is a powerful, yet highly streetable enhancement to an already potent car.

Garrett is ready to take your Mitsubishi Lancer Evo X to the next level with their new Evo X Turbo Upgrade. The Garrett Evo X Turbo Upgrade allows you to push your AWD, rally-bred monster up to an estimated 475 HP with the Garrett GT3071R or a tire smoking estimated 525 HP with the Garrett GT3076R. Each turbo has been meticulously designed to be a bolt-on upgrade with no fabrication, cutting or welding required. The Garrett Evo X Turbo Upgrade features a specially designed twin-scroll turbine housing that mates up directly to the Evo X’s stock exhaust manifold, as well as the stock exhaust down pipe, to allow for aftermarket exhausts to be used without worrying about fitment. The turbine housing allows for the retention of the stock exhaust heat shield for better temperature control as well as a stealth look. The ported shroud compressor housing reduces the occurrence of surge during operation and mates directly to the intake piping as well as the stock outlet position. The Garrett patented dual ball bearing center housing is standard on both turbocharger options for unmatched power handling and unbeatable response. Make: Mitsubishi Model: Lancer Evolution X Applicable Years: 2008+ Engine: 2.0L, Turbocharged Inline 4 Kit Contains: -Choice of Garrett® GT3071R (PN 788550-1) or Garrett® GT3076R (788550-2) dual ball bearing application specific turbocharger -Inlet elbow -Oil drain line -Water lines -Gaskets and necessary hardware -Installation Instructions The Garrett Evo X Turbo Upgrade is a powerful, yet highly streetable enhancement to an already potent car.

0

Motorating

User Rating : No Ratings Yet !
0

Leave A Comment