Ringbrothers Chevelle Parts and Accessories

Ringbrothers Unique Billet and Carbon Fiber Accessories for Chevy Chevelle

February 26, 2015
2820 Views

The 2014 SEMA debut of the Ringbrothers’ most recent triumph, the 1966 Chevelle known as RECOIL, sent shockwaves through the custom car world and the automotive aftermarket. RECOIL, like all of the Ringbrothers’ cars, is a collection of incredibly detailed and unique parts that have been built to exacting tolerances. Everywhere you look on a Ringbrothers car, you’re discovering something new and unexpected. Many of these details, previously only available if you commissioned a car of your own, are now available for your own build.

Ringbrothers Chevelle Billet Parts and Accessories

As a Chevelle owner, it can be difficult to stand out from the crowd. Where once a set of nice wheels, quality paint, and some chrome under the hood set you apart, now you have to truly go above and beyond to even be noticed. It’s with this in mind that Ringbrothers is offering some of the billet parts that it used on its RECOIL Chevelle. The 1966 Chevelle features parts ranging from billet two-piece door handles, door strikers, throwback shifters, and shift knobs to exquisitely machined hood hinges, hood pins, hood adjusters, and clutch reservoirs. With an interior that has “more bolts than stitching,” as Mike Ring put it, the Rings also used their own stainless steel bolt and washer kits on the interior of Recoil. Ringbrothers have made it possible to imbue your vehicle with some of that world-renowned style and detail of Jim and Mike Ring.

Ringbrothers Billet Door HandleRingbrothers Hood Pins

The list doesn’t stop at billet parts either. The Rings’ unique Terminator touch start system is now available to the public. The Terminator system uses a control box and a touch sensitive start button with interactive LED display to replace the keys in your vehicle. Also newly available through HRE Wheels are the Ringbrothers signature Recoil wheel. The Recoil series wheels are available with or without the spoke ring and are customizable in any HRE finish. These modular forged three-piece wheels are available in diameters ranging from 18-inches to 22-inches with any combination of width and offset.

Ringbrothers Machined Billet Hood Hinge

A Ringbrothers build would be incomplete without custom carbon fiber accents and now you can add a few of those carbon fiber pieces to your own build. Ringbrothers will offer made-to-order carbon fiber parts for Chevelles including the hood, deck lid, front bumper, rear bumper, rear spoiler, and dashboard.

Ringbrothers Chevy Chevelle Carbon Fiber Hood

Most Ringbrothers Chevelle parts are designed to be easily installed without modification to your vehicle, except where specified. All Ringbrothers parts are made in the USA by skilled craftsmen from high quality materials and include all required installation hardware and instructions.








The 2014 SEMA debut of the Ringbrothers’ most recent triumph, the 1966 Chevelle known as RECOIL, sent shockwaves through the custom car world and the automotive aftermarket. RECOIL, like all of the Ringbrothers’ cars, is a collection of incredibly detailed and unique parts that have been built to exacting tolerances. Everywhere you look on a Ringbrothers car, you’re discovering something new and unexpected. Many of these details, previously only available if you commissioned a car of your own, are now available for your own build. As a Chevelle owner, it can be difficult to stand out from the crowd. Where once a set of nice wheels, quality paint, and some chrome under the hood set you apart, now you have to truly go above and beyond to even be noticed. It’s with this in mind that Ringbrothers is offering some of the billet parts that it used on its RECOIL Chevelle. The 1966 Chevelle features parts ranging from billet two-piece door handles, door strikers, throwback shifters, and shift knobs to exquisitely machined hood hinges, hood pins, hood adjusters, and clutch reservoirs. With an interior that has “more bolts than stitching,” as Mike Ring put it, the Rings also used their own stainless steel bolt and washer kits on the interior of Recoil. Ringbrothers have made it possible to imbue your vehicle with some of that world-renowned style and detail of Jim and Mike Ring. The list doesn’t stop at billet parts either. The Rings’ unique Terminator touch start system is now available to the public. The Terminator system uses a control box and a touch sensitive start button with interactive LED display to replace the keys in your vehicle. Also newly available through HRE Wheels are the Ringbrothers signature Recoil wheel. The Recoil series wheels are available with or without the spoke ring and are customizable in any HRE finish. These modular forged three-piece wheels are available in diameters ranging from 18-inches to 22-inches with any combination of width and offset. A Ringbrothers build would be incomplete without custom carbon fiber accents and now you can add a few of those carbon fiber pieces to your own build. Ringbrothers will offer made-to-order carbon fiber parts for Chevelles including the hood, deck lid, front bumper, rear bumper, rear spoiler, and dashboard. Most Ringbrothers Chevelle parts are designed to be easily installed without modification to your vehicle, except where specified. All Ringbrothers parts are made in the USA by skilled craftsmen from high quality materials and include all required installation hardware and instructions.

0

Motorating

User Rating : No Ratings Yet !
0

Leave A Comment