TorqStorm GM LS Twin Supercharger Kit

GM LS Engine Twin and Single Supercharger Kits from TorqStorm

August 24, 2017
Comments off
2772 Views

TorqStorm is introducing two new centrifugal supercharger kits for GM LS transplant engines that have become popular fitments in a wide range of older cars and trucks.

The twin kit supports 1,000-plus horsepower while the single sustains 700 plus. Both can be adapted for use with electronic fuel injection or carburetion.

But this is only the start. Though the new designs are aimed at LS-powered hot rods, the game-changer for TorqStorm has been an increased attention to greater completeness. Whether supplied as twin or single, the kits include a Sanden air conditioning compressor, Turn One power steering pump, and Powermaster alternator—the first such integrated kits furnished in the company’s history. Indeed, to the best of our knowledge, the first by any supercharger manufacturer to integrate belt-driven components.

In addition, TorqStorm provides two serpentine belts, an eight-rib to drive the supercharger and a six-rib to impel the accessories; all necessary pulleys, including a tool steel hub for the crank pulley; two self-adjusting tensioners, a blow-off valve; an air filter plus all the necessary mounting brackets and fasteners. To complete the twin kit, a second supercharger, blow-off valve and air filter is added.

GM LS Engine Twin Supercharger System

This revised program evolved following months of LS inquiries concerning proper placement of the pulley-driven components, especially the air compressor. Upper right positioning was final judgment.

And on the topic of completeness, company co-founder Chris Brooker says, “They’re a proper fit for the Gen I Camaro, the Chevy II / Nova, and the Chevelle; in fact, I don’t know what they won’t work on.”

For those who see superchargers as desirable and even status-bearing, TorqStorm’s offerings distinguish themselves by their abundant use of 6061-T6 billet aluminum. Doubtless in an effort to avoid deflection, the material is featured in the construction of the gearbox casing and cover as well as in its 3/4in thick mounting brackets. Perhaps most notable of all its properties is a billet compressor wheel that is aimed to generate boost as early as around 1,800rpm and continues building impetus through the rev range to 7,500.

Available in natural alloy or black anodized or with a micro-polished finish, both supercharger kits go on sale in September. Base prices, which include the above-mentioned accessories, are stated at $6,950 for the GM LS Twin Supercharger Kit and $4,950 for the single supercharger kit.

In addition to the LS twin kit, TorqStorm’s priority in 2017 will be the introduction of further twin supercharger designs. These will empower the small-block Chevrolet, Oldsmobile, big-block Chevrolet, small-block Mopar, as well as big- and small-block Fords.

TorqStorm is introducing two new centrifugal supercharger kits for GM LS transplant engines that have become popular fitments in a wide range of older cars and trucks. The twin kit supports 1,000-plus horsepower while the single sustains 700 plus. Both can be adapted for use with electronic fuel injection or carburetion. But this is only the start. Though the new designs are aimed at LS-powered hot rods, the game-changer for TorqStorm has been an increased attention to greater completeness. Whether supplied as twin or single, the kits include a Sanden air conditioning compressor, Turn One power steering pump, and Powermaster alternator—the first such integrated kits furnished in the company’s history. Indeed, to the best of our knowledge, the first by any supercharger manufacturer to integrate belt-driven components. In addition, TorqStorm provides two serpentine belts, an eight-rib to drive the supercharger and a six-rib to impel the accessories; all necessary pulleys, including a tool steel hub for the crank pulley; two self-adjusting tensioners, a blow-off valve; an air filter plus all the necessary mounting brackets and fasteners. To complete the twin kit, a second supercharger, blow-off valve and air filter is added. This revised program evolved following months of LS inquiries concerning proper placement of the pulley-driven components, especially the air compressor. Upper right positioning was final judgment. And on the topic of completeness, company co-founder Chris Brooker says, “They’re a proper fit for the Gen I Camaro, the Chevy II / Nova, and the Chevelle; in fact, I don’t know what they won’t work on.” For those who see superchargers as desirable and even status-bearing, TorqStorm’s offerings distinguish themselves by their abundant use of 6061-T6 billet aluminum. Doubtless in an effort to avoid deflection, the material is featured in the construction of the gearbox casing and cover as well as in its 3/4in thick mounting brackets. Perhaps most notable of all its properties is a billet compressor wheel that is aimed to generate boost as early as around 1,800rpm and continues building impetus through the rev range to 7,500. Available in natural alloy or black anodized or with a micro-polished finish, both supercharger kits go on sale in September. Base prices, which include the above-mentioned accessories, are stated at $6,950 for the GM LS Twin Supercharger Kit and $4,950 for the single supercharger kit. In addition to the LS twin kit, TorqStorm’s priority in 2017 will be the introduction of further twin supercharger designs. These will empower the small-block Chevrolet, Oldsmobile, big-block Chevrolet, small-block Mopar, as well as big- and small-block Fords.

0

Motorating

User Rating : No Ratings Yet !
0

2 Comments