Gen 5 Camaro Lowering Springs

BMR Suspension Improves the Stance of Your 2010-2014 Camaro

January 21, 2011
2029 Views

Improve the handling and cosmetic appeal of your 5th Gen Camaro without sacrificing ride quality with a set of Lowering Springs from BMR Suspension.

BMR Suspension Camaro Lowering Springs

BMR invested extensive time and resources to develop a set of lowering springs that produce the ideal rate for optimal handling without sacrificing ride quality. The front springs lower the vehicle by 1” and have a spring rate of 220 pounds per inch. The rear springs lower the vehicle by 1” and have a spring rate of 460 pounds per inch.

2010-2014 Camaro Lowering Springs

All BMR springs are cold wound from high-tensile chrome silicon wire, stress relieved, compressed for permanent set then shot peened and computer tested. Some of these procedures are overkill but it ensures a long, trouble-free life with consistent rates and ride heights. Because of these features, BMR is able to offer a lifetime warranty against spring sag.

2010-2014 Camaro Suspension Upgrade

A set of BMR Camaro Lowering Springs (SP019) will lower the center of gravity and dramatically increase the cornering capabilities of your F-Body. Pricing for the pair is right around $230. Front springs (SP020) and rear springs (SP021) also sold separately. Installation time of 3-4 hours. Available in a red powdercoat finish.

Improve the handling and cosmetic appeal of your 5th Gen Camaro without sacrificing ride quality with a set of Lowering Springs from BMR Suspension. BMR invested extensive time and resources to develop a set of lowering springs that produce the ideal rate for optimal handling without sacrificing ride quality. The front springs lower the vehicle by 1” and have a spring rate of 220 pounds per inch. The rear springs lower the vehicle by 1” and have a spring rate of 460 pounds per inch. All BMR springs are cold wound from high-tensile chrome silicon wire, stress relieved, compressed for permanent set then shot peened and computer tested. Some of these procedures are overkill but it ensures a long, trouble-free life with consistent rates and ride heights. Because of these features, BMR is able to offer a lifetime warranty against spring sag. A set of BMR Camaro Lowering Springs (SP019) will lower the center of gravity and dramatically increase the cornering capabilities of your F-Body. Pricing for the pair is right around $230. Front springs (SP020) and rear springs (SP021) also sold separately. Installation time of 3-4 hours. Available in a red powdercoat finish.

0

Motorating

User Rating : No Ratings Yet !
0

Leave A Comment